MOES ZHUB Wired Zigbee Hub

Product Identification

• Product: MOES Wired Zigbee Smart Gateway Hub

• Submitted model: ZHUB

• Closest verified model: ZHUB-MS / ZHUB-MS-DC13

• Brand: MOES

• Protocol: Zigbee 3.0

• Connection type: Wired Ethernet gateway

• Model warning: The submitted sheet gives only “ZHUB”. Its 5V/2A and −10°C to 55°C specifications match MOES ZHUB-MS documentation, but the exact rear-label model must be confirmed before publication.

2. Recommended Shopify Title

MOES ZHUB Wired Zigbee 3.0 Smart Gateway Hub for Tuya & Smart Life — 5V/2A

3. Short Description

Connect compatible Zigbee 3.0 switches, sensors, lights and other smart devices to the MOES, Tuya or Smart Life ecosystem through a stable wired network connection. This compact gateway uses a 5V/2A supply and provides centralized device, scene and automation management from your smartphone.

4. Full Product Description

The MOES ZHUB wired gateway acts as the central bridge between compatible Zigbee smart devices and your home network. Instead of connecting every low-power sensor or switch directly to Wi-Fi, compatible products communicate through a dedicated Zigbee mesh while the gateway connects to the router by Ethernet.

Once configured through the MOES app, compatible devices can be grouped into rooms, used in scenes and included in smart automations. Tuya Smart and Smart Life are also supported according to the manual, although MOES recommends its own app for the newest service features.

The verified ZHUB-MS family has a compact 95 × 95 × 22mm enclosure, operates from DC 5V/2A and is designed for indoor use from −10°C to 55°C. Exact casing colour, connector type and supplied adapter can vary, so the Orion SKU should be checked against the rear label and packaging.

5. Key Features

• Zigbee 3.0 smart-home gateway

• Wired Ethernet connection for stable network access

• MOES app support

• Compatible with Tuya Smart and Smart Life

• Centralized Zigbee device and scene management

• Supports smart automations and app notifications for compatible devices

• Dedicated Zigbee mesh helps reduce direct Wi-Fi device load

• Two status indicators for network and configuration state

• Compact 95mm square design

• DC 5V/2A power input

6. Technical Specifications

7. Indicator Behaviour

Network indicator — green

• Off: network disconnected

• Steady on: network connected

• Blinking: data transmission

Status indicator — green

• Steady on: ready for connection

• Blinking: pairing/access learning mode

• Off: connection completed

8. Compatibility

• Compatible Tuya/MOES Zigbee switches

• Compatible Zigbee sensors

• Compatible Zigbee lights and plugs

• Compatible Zigbee curtain devices

• Compatible Zigbee alarms and security products

• MOES, Tuya Smart and Smart Life mobile ecosystems

Compatibility is device- and firmware-specific. Do not claim compatibility with every generic Zigbee device, Home Assistant, Zigbee2MQTT, Matter, Thread, Bluetooth Mesh or Apple HomeKit unless the exact supplied model is separately verified.

9. Device Capacity

The current MOES store page states up to 300 devices for its wired version, but the ZHUB-MS instruction manual does not state a capacity. Treat 300 as a current manufacturer-store claim and confirm the supplied hardware/firmware before placing it prominently on the Orion listing.

10. Package Contents

The ZHUB-MS family manual lists:

• 1 × Wired Smart Gateway

• 1 × Instruction Manual

• 1 × Power Cable

• 1 × Network Cable

• 1 × Power Adapter — optional/version-dependent

Confirm the actual Orion package before publishing the adapter as included.

11. Setup Overview

1. Connect the gateway to a DC 5V/2A power source.

2. Connect it to the home 2.4GHz-band router using the network cable.

3. Connect the phone to the same local network.

4. Open the MOES app and add the Zigbee gateway.

5. Put compatible Zigbee sub-devices into pairing mode and add them through the gateway.

12. Safety & Placement

• Use indoors in a dry, ventilated location.

• Do not disassemble or modify the gateway.

• Keep it away from liquids, corrosive materials and excessive heat.

• Metal walls, floors and high-power appliances can reduce Zigbee range.

• For weak coverage, reposition the gateway or use compatible Zigbee repeaters.

• Verify the supplied adapter voltage before connection.