MOES ZSS-QY-HP Zigbee Human Presence Sensor

Product identification

• Recommended title: MOES ZSS-QY-HP Zigbee 5.8GHz mmWave Human Presence Sensor – Ceiling Mount

• Brand: MOES

• Model: ZSS-QY-HP

• Product type: Zigbee human presence sensor

• Technology: 5.8GHz microwave/mmWave radar with illuminance sensing

• Installation: Recessed ceiling mount

• Power: Hardwired AC mains

• Required accessory: Compatible Tuya/MOES Zigbee gateway

Short description

Detect movement, micro-movement and even stationary human presence with the MOES ZSS-QY-HP ceiling sensor. Its 5.8GHz radar provides an adjustable 0–9m detection range, adjustable sensitivity and 0–2000 lux sensing for responsive Zigbee lighting, HVAC and security automations.

Full description

The MOES ZSS-QY-HP is a recessed ceiling-mounted Zigbee human presence sensor designed for more dependable occupancy automation than a conventional motion-only PIR sensor. Its 5.8GHz radar detects human presence, movement, micro-movement and stationary states such as a seated or sleeping person within the configured area.

Through the MOES, Tuya Smart or Smart Life ecosystem and a compatible Zigbee gateway, users can monitor presence and illuminance and create automations for compatible lighting, air conditioning, ventilation, alarms and other smart devices. Detection sensitivity, range and timing can be adjusted to suit the room and reduce unwanted triggers.

The unit is powered directly from AC 100–250V and installs flush into the ceiling using spring clips. Because mains wiring and ceiling cutting are required, installation by a qualified electrician is strongly recommended.

Key features

• 5.8GHz radar-based human presence detection

• Detects movement, micro-movement and stationary presence

• Adjustable 0–9m detection distance; official default 7m

• Sensitivity adjustable from 0 to 9; official default 7

• Integrated 0–2000 lux illuminance sensing

• Fast target-confirmation setting from 0 to 0.5 seconds

• Target-disappearance delay adjustable from 20 seconds to 25 minutes

• Zigbee connectivity for smart scenes and automations

• Recessed ceiling installation with a discreet round face

• Wide AC 100–250V working voltage

• Compatible Zigbee gateway required

Verified specifications

Smart functions

• Presence/absence status in the app

• Human movement, micro-movement and stationary-presence detection

• Adjustable radar sensitivity

• Adjustable detection distance

• Adjustable detection and disappearance timing

• Illuminance reporting for brightness-based automations

• Smart-scene linkage with compatible Zigbee lights, switches, HVAC or alarms

• Target-distance reporting may be available depending on gateway/app/device firmware

Gateway and app requirements

This is the Zigbee version, so a compatible MOES/Tuya Zigbee gateway is required for app access and smart automations. MOES recommends its MOES app; Tuya Smart and Smart Life are also stated as supported in the manual. Third-party Zigbee platforms may require explicit device support or a custom handler.

Package contents

• MOES ZSS-QY-HP human presence sensor ×1

• User manual ×1

Confirm whether any connector, screws or other installation accessories are included in the local supplier package before publishing.

Installation and safety

• Installation must be performed with mains power isolated.

• Use a qualified electrician if you are not trained in mains-voltage wiring.

• Choose the ceiling position according to the intended detection area.

• The manual describes a 93mm face, approximately 65×70mm rear housing and an approximately 80mm ceiling cut-out.

• Avoid installation near continuously moving curtains, fans, vibrating fixtures or sources that may create unwanted radar triggers.

• Tune sensitivity, range and delay after installation for the actual room.

• Do not claim outdoor or wet-area suitability unless confirmed by the supplier; an IP rating was not verified in the official specification used here.

Suitable applications

• Living rooms and bedrooms

• Offices and meeting rooms

• Hotels and serviced apartments

• Smart lighting automation

• HVAC and ventilation occupancy control

• Indoor security and presence monitoring

• Bathrooms only where permitted by local electrical rules and safe mounting zones