MOES ZSS-S01-GWM-C Zigbee Door & Window Sensor

Product identification

• Recommended title: MOES ZSS-S01-GWM-C Zigbee Smart Door & Window Sensor with Open/Close Alerts

• Brand: MOES

• Model: ZSS-S01-GWM-C

• Product type: Zigbee magnetic door/window contact sensor

• Power: Replaceable CR2032, 3V

• Connectivity: Zigbee

• Required accessory: Compatible MOES/Tuya Zigbee gateway

Short description

Monitor doors, windows, cabinets and other openings with the compact MOES ZSS-S01-GWM-C Zigbee contact sensor. It reports open/closed status to a compatible Zigbee gateway, supports smart-home automations and includes a replaceable CR2032 battery with low-battery notification.

Full description

The MOES ZSS-S01-GWM-C is a compact two-piece magnetic sensor for indoor doors, windows and cabinets. When the host and magnet move apart, the sensor reports an open state through the connected Zigbee gateway; when they align again, it reports closed.

Use the sensor with the MOES, Tuya Smart or Smart Life ecosystem to receive status notifications and create useful scenes—for example, switch on an entry light when a door opens, turn off cooling when a window is left open, or trigger a compatible alarm routine. The low-power Zigbee design runs from a replaceable CR2032 battery and supports a low-battery warning.

The host measures only 40×26×13mm and the magnet 26×9.5×11mm, making the set suitable for discreet adhesive mounting. Correct alignment and spacing are essential for reliable operation.

Key features

• Detects door or window open/closed status

• Compact two-piece magnetic contact design

• Zigbee connectivity for responsive smart-home automations

• Replaceable 3V CR2032 coin-cell battery

• Low-battery alarm/notification support

• Approximate 20±5mm alarm trigger distance

• App notifications and smart scenes through a compatible gateway

• Suitable for doors, windows, cabinets, drawers and similar indoor openings

• Adhesive installation without mains wiring

Verified technical specifications

Smart functions

• Door/window open and closed status

• Mobile-app status notification through the gateway

• Low-battery warning

• Automation trigger for compatible Zigbee devices

• Scene examples: entry light, HVAC pause, security notification or alarm linkage

• Third-party Zigbee integrations may expose battery, contact and tamper status depending on platform support

Gateway and app requirement

This product uses Zigbee and does not connect directly to a Wi‑Fi router. A compatible MOES/Tuya Zigbee gateway is required for MOES, Tuya Smart or Smart Life app functions. Compatibility with third-party Zigbee coordinators depends on the coordinator software and device handler.

Installation guidance

1. Pair the sensor with the Zigbee gateway before final mounting.

2. Clean and dry both mounting surfaces.

3. Install the larger host on the fixed frame and the smaller magnet on the moving door/window, or as permitted by the manual and frame geometry.

4. Align the marks on the host and magnet.

5. Keep the closed-state spacing within the supported range and test open/close reporting before firmly pressing the adhesive pads.

6. Avoid metal surfaces or obstructions that may weaken the Zigbee signal; use suitable spacers if necessary.

7. Install indoors unless the supplier confirms an environmental/IP rating for the supplied unit.

Package contents

• Main door/window sensor host ×1

• Magnetic contact piece ×1

• CR2032 battery ×1, subject to supplier package confirmation

• Adhesive mounting pads ×1 set, subject to supplier package confirmation

• User manual ×1

Suitable applications

• Entry doors

• Windows

• Cupboards and cabinets

• Drawers and storage areas

• Indoor security notifications

• Lighting and HVAC automations