ZS-DL-UK8 8-Gang Black Smart Touch Switch

Product Identification

2. Critical Identification Note

The supplied schedule calls this item a “Wi-Fi Switch”, identifies the model as ZS-DL-UK8, and lists the protocol as Zigbee. Public listings found during research instead identify the very similar WS-DL-UK8 as a MOES/Tuya Wi-Fi 8-gang switch. No authoritative public manual for the exact ZS-DL-UK8 code was found.

Do not publish Wi-Fi, Zigbee, MOES, Tuya, Smart Life, voice-assistant or gateway claims until the exact rear label, packaging or manual is available.

3. Recommended Safe Shopify Title

ZS-DL-UK8 8-Gang Smart Touch Wall Switch — Black, UK Type, Live + Neutral

Use only if Zigbee is confirmed on the physical unit

ZS-DL-UK8 8-Gang Zigbee Smart Touch Wall Switch — Black, UK Type

Short title

ZS-DL-UK8 8-Gang Black Touch Switch

4. Short Description

Control up to eight lighting circuits from one wide, modern black-glass touch panel. The submitted ZS-DL-UK8 schedule specifies UK type, Live + Neutral wiring, AC 100–240V operation and 600W per gang. Connectivity and manufacturer must be confirmed from the exact unit before the product is published.

5. Full Product Description

Designed for rooms with multiple lighting zones, the ZS-DL-UK8 combines eight individual touch controls in one double-width UK-style panel. Its black glass appearance suits modern living rooms, halls, offices, restaurants and other spaces where several circuits need to be managed from a single wall location.

The supplier schedule states AC 100–240V, Live + Neutral wiring, a 20A rating and 600W per gang. Because the supplied sheet gives conflicting Wi-Fi and Zigbee identification—and an exact public ZS-DL-UK8 manual could not be located—connected features such as app control, hub requirement, schedules and voice control remain unverified.

This is a fixed-wiring electrical product and should be installed by a qualified electrician after the exact terminal diagram, current scope, lamp-load limits and wall-box dimensions have been confirmed.

6. Key Features

• Eight touch-control channels in a 4 × 2 layout

• Wide UK-type glass-panel format

• Black finish

• Live + Neutral wiring stated by supplier

• AC 100–240V operating range stated by supplier

• 600W per-gang rating stated by supplier

• Suitable for multi-zone lighting control

• Smart connectivity type requires confirmation

7. Technical Specifications

8. Electrical Load Warning

The schedule states 20A and 600W/gang, but does not define whether 20A is the total panel rating or another test value. Eight channels at 600W equal 4,800W, which is 20A at 240V under an ideal resistive-load calculation. This numerical relationship does not prove the rating scope and does not account for LED-driver inrush, reactive loads, thermal derating or local circuit protection.

Do not advertise 20A per gang. Confirm:

• total combined current;

• allowable load type for the 600W figure;

• LED/CFL/electronic-driver limit;

• per-channel and simultaneous-load derating;

• required breaker and cable size.

9. Connectivity Decision Table

10. Typical Applications

• Large living rooms with multiple lighting zones

• Houses with decorative, cove, ceiling and wall lighting circuits

• Offices and meeting rooms

• Restaurants, showrooms and reception areas

• Multi-circuit halls and common spaces

11. Package Contents

Not verified. Confirm whether the package includes:

• 1 × 8-gang switch panel

• mounting frame/backplate

• fixing screws

• user manual

• gateway, if the confirmed protocol requires one

12. Installation Notes

1. Isolate power at the distribution board and verify absence of voltage.

2. Confirm a Neutral conductor and eight separate switched-load conductors are available.

3. Check the physical back-box size, depth and fixing centres before purchase or wall work.

4. Follow only the terminal diagram supplied with the exact unit.

5. Confirm combined current and individual lamp-load limits before energising multiple channels.

6. Use a qualified electrician and locally compliant circuit protection.

7. Pairing should only be attempted after the exact Wi-Fi/Zigbee protocol and application have been confirmed.